How to make your iPhone speaker louder and better audio quality: If you’re aiming to enhance the volume of your iPhone, there are a couple of effective methods you can try. Firstly, you can tweak the EQ settings in Apple Music or boost the volume level within Spotify. Additionally, you have the option to elevate the streaming quality for Apple Music. To do this, navigate to Settings, then Music, and finally Cellular Streaming. Here, you can opt for High Quality to experience better audio.
iPhones are renowned for delivering top-notch sound quality, whether it’s via their built-in speakers, wired headphones, or wireless earbuds. Nevertheless, there might be instances when you encounter less-than-desirable audio quality on your iPhone. This problem could stem from either hardware or software factors.
The good news is that if you happen to face audio-related problems while making calls, enjoying music, or watching videos, there are several troubleshooting steps you can take.
In the following sections, we’ll guide you through each of these steps to help you resolve the issue effectively.
Table of Contents
Enable High-Quality Streaming
Activate High-Quality Streaming. Although you can make a few adjustments, like refining sounds and vibrations, to address volume concerns on your iPhone, numerous third-party apps such as YouTube Music and Spotify offer settings to govern or enhance audio quality.
In many instances, an app’s sound quality is initially set to a lower level, either normal or low, to conserve data while not connected to Wi-Fi. However, depending on the app, even the quality of Wi-Fi usage might default to a lower setting.
For example, to enhance the audio quality of Spotify on your iPhone, launch the app, access Settings, and then proceed to Audio Quality. Here, you can opt for Very High when streaming over Wi-Fi. This choice is also available for downloads, and if you possess a robust data plan, this option can extend to cellular streaming as well. Prior to exiting the settings menu, remember to disable Auto Adjust quality to ensure a consistent audio experience.
The procedure for activating high-quality streaming in other third-party music apps follows a comparable pattern. You can also enable high-quality streaming for Apple Music by navigating to Settings, then Music, and finally Cellular Streaming, where you can pick High Quality. Moreover, you can fine-tune the equalizer settings by tapping on EQ in the Music settings menu.
Turn off the Reduce Loud Sounds option on your iPhone
Please take note: If you’re utilizing iOS 13 or an earlier version, it’s possible to deactivate the volume limiter on your phone. Navigate to the Settings app, scroll down, and select Music. Locate the Volume Limit and confirm that it’s deactivated. If it’s currently active, tap on Volume Limit and move the volume control slider to the far right. However, be aware that this feature was disabled starting from iOS 14 and subsequent versions.
How to Turn off the Reduce Loud Sounds option on your iPhone:
- Launch the Settings app on your iPhone.
- Tap on either Sounds & Haptics or simply Sounds – whichever you see on your screen.
- Find the Headphone Audio section and give it a tap.
- Look for Headphone Safety and tap on it.
- Check if the toggle switch for Reduce Loud Sounds is turned on. If it is, just tap it to turn it off.
Adjust headphone settings on your iPhone
At times, making specific adjustments or enhancements within the iOS system might unintentionally lead to a decrease in audio quality on your iPhone. If you’ve already reviewed your other settings and haven’t identified any issues, it could be worthwhile to explore modifications to the headphone accommodations within the accessibility settings.
Surprisingly, fine-tuning the headphone accommodations can actually enhance the audio quality of your iPhone. To embark on this process, navigate to Settings, then Accessibility, and subsequently, Audio/Visual. Here, activate the Headphone Accommodations option. Now, under the TUNE AUDIO FOR section, experiment with Balanced Tone, Vocal Range, and Brightness to find the most suitable configuration for your preference.
Next, utilize the slider options—Slight, Moderate, and Strong—to adjust the effect’s intensity. Ensure that both Phone and Media are enabled under the APPLY WITH category. As you make these adjustments, you can tap Play Sample to gauge any noticeable improvements. Alternatively, you can play music in the background while modifying settings in real-time to observe changes more effectively.
Clean Your iPhone Speakers
It might seem insignificant, but checking the cleanliness of your iPhone’s speakers can play a crucial role in enhancing its sound quality. Even a small accumulation of dirt or lint can have a notable impact on the audio output from your iPhone’s speakers. If you notice any obstructions within the speaker holes, there are simple steps you can take to address this issue. For a more detailed guide on this, read our comprehensive manual on how to clean your iPhone speakers like a pro.
Here’s a safe method to clean your iPhone speakers:
- Turn Off Your iPhone
- Brush the Speaker Grilles
- Use a Soft Tip Air Blower
- Wipe with a Microfiber Cloth
- Toothpick with Cotton Wrapped
It’s imperative to exercise caution to prevent any liquid from entering the speaker grilles. Therefore, ensure that the damp cloth is not excessively wet before you proceed to clean away any debris. Following these steps can help ensure optimal sound quality from your iPhone’s speakers.
Set Up Personalized Spatial Audio
If you’re utilizing AirPods (3rd generation), AirPods Pro, AirPods Max, AirPods, Beats Fit Pro, or Beats Studio Pro for audio, you can explore the option of employing a customized iPhone audio setup to enhance sound quality. This method employs advanced algorithms to emulate a comprehensive surround-sound encounter, which could potentially address any sound-related issues you’re facing.
To activate the Personalized Spatial Audio feature, initiate the process by tapping the Information (i) icon located beside the name of your connected AirPods within Settings > Bluetooth. Subsequently, opt for “Personalized Spatial Audio” and adhere to the onscreen instructions to configure the feature according to your distinct audio preferences. Alternatively, you can access this functionality by navigating to Settings > Sounds & Haptics > Personalized Spatial Audio.
The setup of Personalized Spatial Audio involves a three-step procedure that utilizes your iPhone’s front camera. Initially, you need to gaze directly into the camera and move your head across different angles. For the ensuing two steps, you’re required to rotate your iPhone in a circular manner from both sides of your head towards the front.
This innovative feature tailors sound output to your unique profile, resulting in a heightened and immersive auditory experience. Simulating surround sound enhances the traditional stereo audio output. It’s highly plausible that implementing this feature will notably elevate the sound quality of your iPhone when paired with compatible headphones.
Activate Hearing Aid Compatibility
If you’re encountering audio problems on your iPhone, especially when using headphones, there’s an unconventional solution that might do the trick. Give activating “hearing aid compatibility” a shot – this feature is designed to assist individuals with hearing challenges.
To give it a go and check if it enhances your iPhone’s audio, follow these steps: Head to Settings, then tap on Accessibility, and finally select Hearing Devices. Toggle on the option for Hearing Aid Compatibility.
While the primary purpose of this setting is to enhance audio quality when using hearing aids, it can unexpectedly lead to better sound quality when using specific wired or wireless headphones. It’s certainly worth a try to see if it makes a difference.